EQ 3000
AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN
When the Wheel Type MOTO is activated, automatically, the ALU1 Program Type is selected, if you attempt to select
another programs by keys [2] o [4] the machine will display the error code ERR 043.
To acquire automatically the geometrical wheel data by Distance/Diameter and Width sensors, it is necessary to
keep the same reference points on the rim as Program Type ALU1.
Furthermore, when the Wheel Type MOTO is selected, the actual distance value is increased of 150 mm due to the
extension length for the Diameter/Distance sensor.
Each time the motorcycle adaptor is removed (for example for balancing a car wheel) and installed again, it
is always necessary to match the written “Cal” which are present on the flange and on the motorcycle adaptor
otherwise the balancing accuracy may be compromised.
