Function
Setting
Description
Display
Positive pulse width
Measurement
No measurement
To measure the positive pulse width of
signal.
+Width
Negative pulse width
Measurement
No measurement
To measure the negative pulse of
signal.
-Width
Delay 1
Measurement
No measurement
Mesures the delay between the two
waveforms of of channel A and B by
using the rising edges.
Delay 1
Function
Setting
Description
Display
Delay 2
Measurement
No measurement
Mesures the delay between the two
waveforms of of channel A and B by
using the falling edges.
Delay 2
Rise time
Measurement
No measurement
To measure rise time of signal.
Rise Time
Fall time
Measurement
No measurement
To measure fall time of signal.
Fall Time
You can save a waveform when it is displayed on the screen. To do it, press SAVE/CALL to open the SAVE interface
(refer to Figure 17), press F1 to select "Waveform", press F2 to select a desired storage location for the waveform,
then press F4 to save the waveform.
There are two ways to recall the saved waveform:
One is that you recall a saved waveform from the SAVE interface. To do it, first you must open the channel to
wich the saved waveform belongs and; ine the SAVE interface, press F1 to select "waveform", press F2 to select
the storage location where the waveform you want is saved, then press F3 to recall the saved waveform. On the
screen, the saved waveform takes place of the waveform of the currently measured signal of the same channel.
The second is that the saved waveform is used as reference waveform which is used to be compared with the
waveform of the currently measured signal. This is called REF function. In this function, you recall a saved waveform,
which will appear on the screen with the present waveform for comparison in order to find the difference between
the two waveforms, and by this means the cause of malfunction can be quickly determined
Operation Instruction
Press A MEASURE or B MEASURE to open the menu interface. (The "A MEASURE" key is for channel A, while the "B
MEASURE" is for channel B). Press F1 to select the desired page on which your desired measurement item exists.
Then press F2, F3 and/or F4 to select and start your desired measurement(s).
Note:
Only three measurement items can be selected and executed by the scopemeter at the same time; if one more
measurement item is selected, the first measurement item will be cancelled automatically.
To cancel all measurements you have selected, press F2 when page 6 is displayed.
How to Save/Recall/Transfer Waveform
AC 5110
OSCILLOSCOPE
