background image

GREAT BRITAIN

 For consumer contact, please visit www.clasohlson.co.uk and click on customer service.

Ver. 200805

Charger

Article number:   18-2001 

36-3313 

   

18-2005 

36-3314 

Model:  

Vanson V-3213

Please read the entire instruction manual before using the  
product and save it for future reference. We apologise for any text  
or photographic errors and any changes of technical data. If you 
have any questions concerning technical problems please contact 
our Customer Service Department.

Battery Charger with USB

•  Easy and convenient. Charges 2-4 HR03/HR6 Ni-MH batteries. 

•  The charger is equipped with a 5 V DC 500 mA USB outlet. 

•  Microprocessor controlled charging.

•  Charging time: Two to four hours. 

•  Comes with eco-friendly NiMH batteries.
 

36-3313 

4 x HR6 2500 mAh 

 

36-3314 

4 x HR03 1000 mAh 

•  2 LED charge indicators:
 

RED lit 

Quick charging

 

RED flashing 

Wrong battery type or bad contact

 

RED unlit 

Charging complete

 

GREEN lit 

USB outlet ready for use

•  Safety functions: 

Negative delta-V cut off 

 

Timer 

 

Short-circuit protection 

 

Polarity protection

Warning

1.  Read the entire instruction manual before using the charger.
2.  The charger is only designed for charging Ni-MH batteries, size 

HR03 or HR6. Attempts to charge other types of batteries can 
lead to personal injury or damage the charger. The batteries 
can leak or explode if incorrectly inserted, thrown in a fire, mixed 
with other types of batteries or short circuited.

3.  Do not expose the charger to rain or moisture. The product  

is only intended for indoor use.

4.  Unplug the adaptor from the power point when the charger  

is not in use.

5.  Do not use an extension lead or other accessory besides 

the ones included with the charger. Doing so can lead to an 
electrical fire or personal injury.

6.  Do not use the equipment if damaged. Allow a qualified 

repairman to perform any necessary repairs.

7.  Use only the included adaptor. Do not disassemble or modify 

the product in any way. 

8.  Remove the adaptor from the mains before and cleaning of  

the charger of adaptor.

9.  The charger is not a toy. Do not allow small children near the 

charger without supervision.

Charging

N.B. The rechargeable batteries are not pre-charged. They must be 
charged first before using them for the first time.

1.  Insert 2 or 4  Ni-MH batteries; size HR6/HR03 in the battery 

slots. The batteries must be charged in pairs. When charging 
2 batteries, they must both be charged either in the right or left 
section. (Fig. 1 and Fig. 2)

Battery status

The charger automatically senses the battery status when charging 
commences.

•  If any of the batteries is unchargeable, short circuited,  

or are mispositioned in the battery compartment, the LED 

 

will flash rapidly.

• 

Remove the defective battery and dispose of it. Refer to 

Disposal.

Charging time

N.B. The charging time can vary depending on the capacity and 
condition of the battery.

Battery size

Capacity

Charging time

HR6

1800-2000 mAh

3 – 3,5 hours

2100-2300 mAh

3,5 – 4 hours

2500-2800 mAh

4,5 – 5 hours

HR03

700-800 mAh

2 – 2,5 hours

900-1100 mAh

3 – 3,5 hours

USB outlet

•  Charging of the batteries in the battery compartment is stopped 

when the USB outlet is used.

•  The green LED lights when the USB outlet is ready for use.
•  The connected USB devices power consumption cannot exceed 

500 mA.

Disposal

Follow local ordinances when disposing of this product. If you are 
unsure please contact your municipality.

Specifications

Power Supply: 

100-240 VAC, 50/60 Hz

Secondary outlet:    HR6: 2 x 2.8 VDC, 600 mA, 3.36 VA

 

 

 

HR03: 2 x 2.8 VDC, 350 mA, 1.96 VA

USB outlet:  

5  VDC 500 mA

Fig. 1

Fig. 2

2.  Insert the batteries according to the (+ and -) markings in the 

battery compartment.

3.  Charge only one battery size at a time. Don’t mix HR6 and 

HR03 batteries.

4.  Connect the charger to a power point (100-240 VAC). The built-

in power supply will adjust automatically.  The red LED light is lit 
when charging is in progress.

5.  The LED turns off when the batteries are fully charged and 

ready to use.  

6.  Remove the charged batteries from the charger and remove the 

charger from the outlet. Never let charged or even remain in the 
charger when it is unplugged or for extended periods of time.

ENGLISH

Reviews: