Use
1. Press and hold the measuring button (4) to
start the measuring. The display will light
up if the battery is good (change batteries if
the display does not light up).
2. Hold the IT thermometer in its handle and point
it at the surface to be measured. The laser point
indicates where on the surface the temperature
gets measured. “SCAN” will show in the upper
left corner of the display during measuring.
3. Let go of the measuring button to finish
the measuring. The measured temperature and
the word “HOLD” is shown on the display.
4. The IR thermometer is automatically shut off
6 seconds after the measuring is finished.
8
9
English
