12
E
N
G
LI
S
H
Care and Maintenance
Use a soft damp cloth to clean the product. Never use solvents or strong detergents.
The front panel’s connecting plugs can be cleaned with a cotton earbud dipped in
a light cleaning solution etc.
Troubleshooting Guide
Problem
Possible cause
Remedy
The device does
not start
.
The car’s ignition is not
turned on
.
Turn on the ignition
.
The fuse is broken
.
Check and change the fuse
.
The disc cannot
be played
.
The disc is not compatible
.
Try another disc
.
The disc is not properly in-
serted.
Insert the disc with
the label up
.
The disc is dirty
.
Clean the disc
.
The temperature inside of
the car is too high
.
Wait until the car has
cooled down
.
Condensation on the lens.
Shut off and wait for an hour
or more
.
No sound
.
The volume is turned down
.
Adjust the volume
.
The speakers are not con-
nected properly
.
Check the connections
.
The buttons do
not work
.
The micro processor may
need to be reset
.
Press “Reset” behind the front
panel
.
The front panel is loose
.
Attach the front panel
properly
.
The sound
disappears.
The device is at a too high
angle (max 30 °)
.
Adjust the installation.
The disc is dirty or faulty
.
Clean or switch the disc
.
No radio
reception
.
Antenna cord is not
connected.
Check the connections
.
The signals are too weak
.
Choose another frequency/
station
.
The display shows
ERROR 1
.
The micro processor may
need to be reset
.
Press “Reset” behind the front
panel
.
The display shows
ERROR 2
.
The micro processor may
need to be reset
.
Press “Reset” behind the front
panel
.
The clock
displays “NO
CLOCK”
.
The clock is set automatically
by the RDS information
.
The radio station may not be
transmitting RDS information
or the reception is too weak
.
Switch to a stronger signal
.
