Clas Ohlson NC802APT, Instruction Manual

Page: 6 / 52

6
E
N
G
LI
S
H
Install the configuration program
The following installation instructions apply for Windows XP with Service pack 2
installed.
1. Insert the supplied CD into the computer’s CD-ROM drive. The installation
guide automatically starts and the start image is displayed. If the installation
does not start automatically, use a file explorer setup.exe application found
directly under the root folder on the CD-ROM.
2. When the installation program has started a welcome image is displayed.
Click on
Setup Camera
to start the installation.
3. The installation program searches for the camera on the network and then
displays the camera in the list to the left.
• Mark the camera and click “ ► ” next.
• In the next dialogue you enter the user name and password for the camera.
Click “ ► ” next.
The preset user name and password are:
• User name: Administrator
• Password: (no password)
4. Select if the camera is to use a fixed IP address ( Fixed IP address ) or to
automatically obtain an IP address (
Dynamic IP address
) from e.g. a router
with DHCP function. Select your choice and click “
►
” next.