4
English
Assembly
1. Make sure that the product is unplugged from the mains.
2. Place the motor housing on a flat, stable surface.
3. Fit the juice bowl onto the motor housing.
4. Fit the strainer basket with shredder disc onto the drive shaft.
Note:
The drive
shaft has guides and ball-catches which lock the strainer in place. Line the strainer
up with the guides and press it down until the ball-catches around the hole in
the centre of the strainer lock it in place. The strainer should be a little lower than
the lip of the juice bowl when it is fitted. Refer to the picture below.
5. Fit the pulp container onto the motor housing.
