7
E
n
g
li
s
h
WiFi setup – see connection access point (router)
1. You can see which WiFi access point (router) the internet radio is connected to.
2. [MENU], SETUP, NETWORK, WIFI SETUP, VIEW CONNECTED AP.
WiFi setup – without DHCP
1. On rare occasions, an internet radio has a static IP address, and then you can
deactivate DHCP.
2. [MENU], SETUP, NETWORK, WIFI SETUP, DHCP, OFF and then [ENTER].
WiFi setup – with DHCP
1. [MENU], SETUP, NETWORK, WIFI SETUP, DHCP.
2. Press ON if you wish to use the router’s DHCP service and the internet radio will
get an IP address, Gateway and DNS from the router.
Cable setup – with DHCP
1. [MENU], SETUP, NETWORK, CABLE SETUP, DHCP.
2. Press ON if you wish to use the router’s DHCP service and the internet radio will
get an IP address, Gateway and DNS from the router.
Cable setup – without DHCP
1. If you choose not to use DHCP, you will have to use the advanced setup configuration.
2. [MENU], SETUP, NETWORK, CABLE SETUP, ADVANCED SETUP.
3. Enter your IP address and Gateway.
Network – DNS configuration
1. [MENU], SETUP, NETWORK, DNS CONFIG.
2. The internet radio can accept 2 DNS addresses. If you select DHCP, the DHCP
server will assign you a DNS address. It is possible to add another one by going to
ADD DNS and then entering the DNS address.
3. You can always change your DNS address and add another one.
Network – PPPoE configuration
1. Connect the LAN port on the internet radio to your modem.
2. [MENU], SETUP, NETWORK, PPPoE CONFIG, PPPoE & LINK.
3. Select YES and then [ENTER].
4. Go to PPPoE USER INFO and then press [ENTER].
5. Go to USER NAME and then press [ENTER]. Enter your username
and then press [ENTER].
6. Go to PASSWORD and then press [ENTER]. Enter your password
and then press [ENTER].
7. It might take a couple of minutes to register.
Summary of Contents for IRF4S
Page 2: ...2...
