Clas Ohlson ER2536, Instruction Manual

Page: 6 / 36

6
English
Operating instructions
On/off
The product has two power switches, [ MAIN, ON/OFF ] (1) and [ AC, ON/OFF ] (2)
which work as follows:
[ MAIN, ON/OFF ] [ AC, ON/OFF ]
ON OFF The product is switched on and powered by
the built-in battery.
ON ON The product is switched on and powered by
230 V mains supply.
OFF ON The product is switched off and the built-in
battery is being charged.
OFF OFF The product is switched off and the built-in
battery is not being charged.
Connections and settings
For details of connections and settings, refer to the Buttons and functions
section above.
Bluetooth connection
To connect an external device via Bluetooth, do as follows:
1. Switch the speaker to the desired mode, refer to the table above.
2. Press [ Select Input ] so that the LED indicator for Bluetooth status lights (it starts to
flash after a few seconds)
3. Activate Bluetooth on the device to be paired with the speaker.
4. The speaker will appear on your device as
ER2536 , select it and pair it with your
device. Refer to the instruction manual of your device for further clarification if you
are unsure.
5. Once connection has been established the LED indicator on the speaker will shine
a steady blue.
6. Start playback on your device. Set the desired volume levels both on your device
and the speaker. Control the other playback settings on the external device and on
the speaker.
Note:
If you are prompted to enter a PIN code on your device, you should enter
0000
(four zeroes). Certain devices may also require you to approve the connection.
If you have connected a mobile phone to the speaker via Bluetooth and receive
a call whilst you are listening to music, the music will be switched off automatically.
Once the call has been ended, music playback will be resumed (if your phone settings
enable this).