5
English
Repair and maintenance
• Unplug the mains lead before carrying out any repairs or service.
• Empty the container before it becomes totally full and clean it after use.
• If the mains lead is damaged, have it replaced by a professional.
• Remove any bits of ash that have stuck in the tube or nozzle before use, otherwise the motor might
overheat and become damaged.
Cleaning the filters
• Clean the filters as soon as they appear clogged and the suction strength is reduced.
Tip!
To clean the pre-filter quickly, switch the motor off and tap the top of the motor lightly with your
hand a couple of times to dislodge any built-up dust.
• Open the draw latch fastening the lid to the container.
• Pull the pre-filter off the cartridge filter.
• Remove the wing nut and then remove the filter cartridge.
• The filters can be shaken or blasted with an air hose from the inside out.
• Wash the filters by hand in water and a mild detergent. Allow them to air-dry until they are completely
dry before replacing them.
• NEVER use a hair dryer or similar heater to dry the filters more quickly.
• NEVER use the ash vacuum cleaner without a filter.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications:
Model
ECA806N-800, ECA806N-800-UK
Rated voltage
230 V, 50 Hz
Power
800 W
Max. vacuum
17 kPa
Container volume
15 l
Mains lead, length
4.5 m
Suction tube, length
1.2 m
Weight
3.6 kg
