Clas Ohlson DS43, Instruction Manual, Page: 5 / 24

5
English
10 mm
8
0 mm
10
5
2
5
Assembly
1. Assemble the column (2) and feed
handle (5) as shown.
2. Securely fasten the drill to the drill
stand.
Operation
Setting the drill depth gauge
1. Securely fasten a drill bit in the
drill chuck.
2. Loosen the height adjustment screw
(8) and adjust the height so that the
tip of the drill bit is approximately
10 mm over the workpiece.
3. Retighten the screw.
4. Lower the drill bit using the feed
handle (5) so that the tip is level with
the workpiece.
5. Reset the depth by turning the depth
gauge ring (10).
6. The gauge should now display the
correct depth.