8
E
N
G
LI
S
H
Operation/running
You may connect devices that run on 230 Volt, 50 Hz alternating currents. Maximum power is
2500 W during regular operation, then 2700 W intermittently (for example, when turning on a
fridge).
The total output of the devices connected to the generator may not exceed the generator’s
own rated output. To calculate the output being used to run the device you can check the
output on the devices’ nameplates or in their manuals. If you cannot find any information con-
cerning the output, calculate it by using the following formula:
Output = Volt x Ampere
Connecting devices
ATTENTION! Make sure you only connect devices that indicate that they manage 230
Volt, 50 Hz.
1. Make sure the devices are not switched on when you connect them.
2. Turn the generator’s circuit breaker for alternating-current to “ON”.
3. Turn on the connecting devices in the order of the output they require. Start with the
device that requires the most.
Turning off the generator
1. Turn off all connected devices and disconnect them from the generator.
2. Turn the generator’s circuit breaker for alternating-current to “OFF”.
3. Allow the generator to run for few minutes without any connected devices before turning
off. This helps to stabilise the generator’s temperature.
4. Turn the motor stop to “OFF”.
5. Turn off the fuel tap.
WARNING!
Allow the generator to cool down properly after running before you touch surfaces that
have become hot during use.
