Clas Ohlson DJC124-144-UK Original Instructions Manual Download Page 5

5

e)  Check for misalignment or binding of moving parts, for broken parts or anything 

else that may affect the operation of the power tool. If there is any damage it must 
be repaired before the tool can be used again. Many accidents are caused by 
poorly maintained power tools.

f)  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp 

edges are less likely to bind and are easier to control.

g)  Use the power tool, accessories, etc., in accordance with these instructions and 

in the manner intended for the particular type of power tool, taking into account 
the working conditions and the type of work to be done.

h)  Using the power tool to do work for which it is not intended may result in 

a hazardous situation.

5)  Using and servicing a rechargeable power tool

a)  Make sure that the switch is in the off position before you fit the battery. 

Fitting the battery to an electric power tool with the switch in the on position could 
cause an accident.

b)  Only charge the battery with a charger supplied by the manufacturer. A charger 

that is suitable for one type of battery may be a fire hazard if used with a different 
type of battery.

c)  Only use the correct batteries with rechargeable hand tools. Using the wrong 

battery may cause damage, injury and fire.

d)  When the battery is not in use, keep it away from metal objects such as paperclips, 

coins, keys, nails, screws or other small items that may form a bridge from one 
pole of the battery to the other. Short-circuiting the poles of a battery may cause 
burns or fire.

e)  If the battery is abused, it may leak acid. Avoid contact with this substance. 

If you happen to come into contact with the acid, rinse the affected area with water. 
If the acid gets into your eyes, seek medical assistance. Acid from the battery may 
cause irritation and burns.

6)  Servicing

a)  Servicing and repairs must be done by authorised personnel, using genuine spare 

parts. This guarantees that the safety of the electric power tool is preserved.

Special safety rules for rechargeable power tools

•  Use only the charger supplied. The product is only intended to be used indoors.
•  If a battery is warm, let it cool down before charging it. The temperature during 

battery charging should be between 0 °C and 40 °C (20–25 °C is recommended 
for optimum charging results).

•  If the battery is charged at a temperature below 0 °C it may become over-

charged, and this may damage the power tool. Do not charge the battery when 
the temperature is above 40 °C. The battery only delivers full power after about five 
charge/discharge cycles.

Summary of Contents for DJC124-144-UK













Reviews: