English
GREAT BRITAIN •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
1
2
3
Ver
. 20161219
Battery Powered Nail Grinder
Art.no 31-9296 Model CP-206
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
Product description
1. Twist the bottom part of the grinder clockwise and remove
the battery.
2. Insert a new battery. Refit the bottom part and turn it anti-
clockwise to lock it into place.
Cleaning
• Clean inside the safety guard when necessary by turning it
anti-clockwise and removing it.
• Use only mild cleaning agents, never solvents or corrosive
chemicals.
• Clean the exterior of the appliance using a lightly
moistened cloth. Use only mild cleaning agents, never
solvents or corrosive chemicals.
• Use the included cleaning brush to clean the grinding head.
Responsible disposal
Wear eye protection.
Read the instruction manual before operating
this machine.
• Only use approved accessories.
• Do not use the appliance if it is damaged or in any way
malfunctioning.
• When grinding claws, never use grinding drums that
are of another size and type than those that came with
the machine.
• The appliance is intended for indoor use only. Keep it away
from water and do not use it in wet locations.
• The appliance may be used by persons with reduced
physical, sensory or mental capabilities or persons with
a lack of experience or knowledge which could jeopardize
their safety, provided they have been instructed in the safe
operation of the appliance and understand the hazards
involved. Never let children play with the appliance.
1. Remove the safety guard by turning it anti-clockwise and
lifting it away from the appliance.
2. Lift up the grinding drum straight up and remove it.
3. Insert a new grinding drum and push it all the way down
into the grinder.
4. Refit the safety guard by turning it clockwise.
Changing the battery
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Battery
1 × AA/LR6 battery
1. Safety guard
2. Roller head
3. [ ] Power switch
Operating instructions
1. Turn the appliance on by pressing [ ] and allow your pet
to get used to the vibrations and sounds of the machine
before starting to grind.
2. Insert the claw of the animal into the hole in the safety guard.
Note:
Be careful and do not attempt to completely grind
a whole nail in one go. Grind each nail only for about
3–5 seconds at a time because the friction will make
them hot. Return to partly-ground nails to finish them off.
Never
use the appliance without the safety guard fitted.
Changing the grinding drum
