4
EN
G
LI
SH
4. The outer tent is equipped with locking pins (C) below the pole sleeves at floor level. Insert a locking pin
into one end of the pole. Repeat the procedure for the other end. Repeat the same procedure with the
other poles.*
5. The outer tent should now be stretched by the poles. Make any needed fine adjustments to the tent poles.
6. Fasten the outer tent to the ground using the tent pegs (D).
*
Caution: Remember that the poles are under tension when bent. Be careful when inserting the
locking pins.
Anchoring the tent
7. Anchor the outer tent to the ground with the included tent pegs (D), making sure that it is completely taut
so that it does not collect water.
Fastening the inner tents
8. Attach the inner tents to the outer tent using the fasteners (E). Fasteners have two different
colours: yellow and black (each fastener consists of two different parts, one on the inner tent and its
corresponding part on the outer tent).
B
C
E
B
C
E
