4
English
• If the convector heater is damaged it should be replaced by
a qualified service technician.
• If the mains lead is damaged it must only be replaced by
the manufacturer, retailer or other qualified service technician.
• The convector heater is only intended for domestic use.
It must not be used on building sites, in greenhouses, barns
or stables containing combustible dust.
• The convector heater becomes very hot during use. Pull out
the plug and let the convector heater cool before cleaning.
• The convector heater should be plugged into an electrical
socket which is visible and easy to access.
• Always unplug the convector heater when it is not in use.
• The convector heater is only designed for normal indoor use
and must not be used outdoors.
• Never turn the convector heater off by unplugging it. Always
turn the convector heater off by setting the on/off switch to
the off position.
• Ensure that no foreign objects enter the convector heater as
this may lead to short circuiting, electric shock, or a fire hazard.
• Never position the convector heater in such a way that the mains
lead is directly in front of or touching the housing of the heater.
• Only use the convector heater with the feet attached.
This model is not designed to be wall mounted.
• The convector heater must only be connected to an earthed
electrical socket with a power supply of 220–240 V AC.
• Only use the convector heater as described in the instruction
manual. Do not use the convector heater for any purpose other
than that for which it was intended or modify it in any way.
• Make sure the convector heater is clean and is not covered
with dust or residue.
• The convector heater is designed to be placed on a hard,
even horizontal surface with the feet facing down.
