5
E
n
g
li
s
h
5. Getting started
5.1 Charging the batteries
N.B.
Charge the headphones before using them for the first time.
1. First connect the included charger cable to the headphones and then to a USB
port. The red LED will come on.
2. When charging is complete the charge indicator will shut off. You should now remove
the charger cable. Normal charge time for the headphones is about 2.5 hours.
N.B.
When an audible signal sounds every 20 seconds and the red LED begins
flashing the battery must be charged.
5.2 Turning the device on/off
Turning on the headphones:
•
Press and hold [ ] for 3 to 5 seconds to turn on the headphones.
•
The LED will flash quickly 4 times a second once the device is on.
•
An audible signal will be heard.
Turning off the headphones:
•
Press and hold [ ] for 3 to 5 seconds to turn off the headphones.
•
The LED will flash red 4 times once the device is turned off.
•
An audible signal will be heard.
N.B.
The device will turn off automatically after 5 minutes to save energy if no signal
is received.
5.3 Pairing to another Bluetooth® device
Pairing
is a function which connects the headphones to another Bluetooth™ device.
Activating pairing mode
1. Make sure the headphones are turned off (or turn them off manually).
2. Press and hold [ ] for 5 to 7 seconds and release when the LED begins flashing
red/blue.
3. Two audible signals will be heard.
N.B.
Pairing mode is active for about 2 minutes. If the headphones do not establish
contact with another Bluetooth® device within 2 minutes it will automatically return to
standby mode.
5.4 Pairing to a Bluetooth® phone
Refer to your mobile phone’s instruction manual.
Summary of Contents for BTH002
Page 2: ......
