7
E
N
G
LI
S
H
Use
Using the remote control
-
Aim the remote control toward the sensor (22) on the front of the player and
press the desired button for the desired function.
Setting brightness and colour
The display’s brightness and colour can be set at anytime during playback.
-
Press and hold the MODE button on the player in order to activate the setting
adjustment for brightness and colour. Press MODE again to select between
COL (colour) or BRI (brightness).
-
Use
and
to adjust the selected setting.
Start playback
1. Set the function switch (1) to DVD to start the device.
2. Open the CD/DVD door by lifting it using the open tab (12).
3. Place in a CD/DVD with the label facing up and close the door. Playback
should start automatically and the CD/DVD menu is displayed (if CD/DVD has
such a menu).
4. Use the navigation buttons on the remote control to navigate through the CD/
DVD menu. Select the desired choice and confirm with OK.
Remarks Picture sharpness is at its best when the screen is viewed straight for-
ward or at an upwards angle.
Volume
-
Turn the volume control (3) to adjust the volume.
Next/previous track/section
-
Use the
or
buttons in order to go to the next or previous track/section.
Fast forward/rewind
-
Press and hold the
or
on the remote control in order to go to the previous
track/section. The actual playback speed is shown on the display.
-
Press and hold the same button for a longer time to change the playback
speed. You can choose between 2, 4, 8 or 20 times playback speed.
-
To go to the next track/section without using the remote, press BACKWARD
(6) or FORWARD (13) on the player itself.
