7
E
n
g
li
s
h
Display
• Set the brightness of the display with [ DIMMER LOW/HIGH/AUTO OFF ].
LOW
,
HIGH
or
AUTO OFF
.
• With AUTO OFF, the display is unlit but lights up when the alarm is activated.
• In AUTO OFF mode, the time can be checked at any time by pressing any button
on the front or top of the projector clock.
Note!
When the [ DIMMER LOW/HIGH/AUTO OFF ] control is set to AUTO OFF,
the display only goes out after about 10 seconds.
Year and date
To show the set year and date, press [
◄◄
Y-M-D ].
Sleep timer
1. With the radio
switched on,
press [ SNOOZE/SLEEP/NAP ]. “90” flashes on the display.
2. Press [ SNOOZE/SLEEP/NAP ] again to choose
90
,
60
,
30
or
15
minutes.
3. The radio switches off automatically when the set time expires.
Nap times (preset nap times)
1. With the radio switched off, press [ SNOOZE/SLEEP/NAP ].
2. A symbol and “90” flash on the display.
3. Press [ SNOOZE/SLEEP/NAP ] again to choose
90
,
80
,
70
,
60
,
50
,
40
,
30
,
20
or
10
minutes’ of nap time.
DST
Press and hold [
►►
DST ] for two seconds to toggle between summer time
and winter time.
AUX-IN
• Connect a device such as an mp3 player to the 3.5 mm AUX-IN jack.
• The radio is switched off automatically when AUX-IN is used.
• Adjust the volume of the mp3 player and the projector clock.
Reset
• If the projector clock does not work properly it may help to reset it.
• Use a pointed object (such as a ballpoint pen or paper clip) to carefully press [ RESET ].
• This restores the projector clock to its factory settings and returns all settings
(clock, date and alarm times) to zero.