12
English
Display programme 2 “dp-2”
• You can choose whether the display is to show
the date, alarm or temperature.
• Select by pressing [ SET ] the required number of times.
• Your selection will be shown on the display constantly.
Display programme 3 “dp-3”
• The display will show the time, which is the standard setting.
Power save mode on/off
Note: During battery operation the power save mode
should always be ON.
Press [ DOWN ] repeatedly to switch between power save
mode ON/OFF.
1. When “oNSd” is displayed,
the power save mode is
ON
.
2. When “−−Sd” is displayed,
the power save mode is
OFF
.
3. The display will switch off after 10 seconds of inactivity
and remain off until any of the sides of the cube is
touched or until the alarm sounds.
