6
E
n
g
li
s
h
Using snooze
When the alarm sounds, press [SNOOZE/DIMMER] once. The alarm stops. It starts
again after the set snooze duration.
Using the projection clock
Press [PROJECTION] to switch projection on and off.
Turn the adjusting knob on the projector to adjust the projected image.
Using the HI-LO dimmer
The clock radio has an adjustable display backlight with dim, medium and
bright settings. Press [SNOOZE/DIMMER] to adjust the brightness level.
This can only be done when the radio is switched off.
FM aerial
Extend the aerial wire and position it for optimum reception. Never cut the aerial wire
or connect it to any other aerial.
Radio
• Press [SLEEP/RADIO] to start the radio. The display shows ON and flashes.
• Press [
▼
] or [
▲
] to set a station. To scan for a station, press and hold
[
▼
] or [
▲
]
for a few seconds, then release.
• You can use [MEMORY] to choose a preset station.
• Turn [VOLUME] to adjust the volume.
• Press [SNOOZE/DIMMER] to switch off the radio.
Using preset stations (Memory)
1. You can program five preset stations.
2. Switch on the radio by pressing [RADIO/SLEEP]. Press [
▼
] or [
▲
] to choose
a station you want to store in the
Memory
.
3. Press and hold [MEMORY] until MEM is displayed and 01 flashes on the display.
4. Press [MEMORY] again to store the station in Memory 01.
5. Press [
▼
] or [
▲
]
to choose another station to store. Press and hold [MEMORY]
until MEM is displayed and 01 flashes on the display. Press + or – to choose 02.
Press [MEMORY] again to store.
6. Repeat step 4 to store up to five stations.
7. To listen to a stored station, press [MEMORY] when the radio is on.
8. To replace a stored station with another, tune to the other station and repeat steps 2-4.
Using the Sleep Timer
• Press [RADIO/SLEEP] twice to go to Sleep mode. The display shows the SLEEP-
icon and 5 (meaning five minutes) and flashes. Keep pressing [RADIO/SLEEP]
to set the sleep timer to 10, 15, 30, 45, 60, 75 or 90 minutes. The SLEEP-icon
appears on the display when the function is in use.
• The radio plays for the set time and then switches off automatically. To see how
much time is left before the radio switches off, press [RADIO/SLEEP] once.
• Press [SNOOZE/DIMMER] to switch off the radio before the sleep timer times out.
