2
English
Shower Set
Art.no 41-2314
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our Customer Services (see address details on the back).
Installation
• Use an appropriate fastening method for the wall in question. Ensure that there are no electrical wires or water
pipes in the wall where you intend to drill/screw.
• The shower should be installed in accordance with current building regulations. If you are unsure regarding making
a hole in the waterproof membrane of your bathroom you should consult a competent person or other professional
contractor familiar with current building regulations.
1. Mark out and drill the
mounting holes (max cc
675 mm). Ensure that they
are vertical, use a spirit level
for accuracy. If using the
included screws and wall
plugs, the holes should be
drilled using a 5.5 mm drill bit.
5. Remove the cover from
the upper wall bracket and
screw the bracket to the wall.
2. Remove the cover cap which
is on the top of the shower rail.
3. Remove the upper wall
bracket from the slide rail.
4. Press the release catch on
the holder and remove it
from the shower rail.
6. Slide the soap dish onto the
shower rail and then fit the
holder back onto the rail.
