8
English
a
b
c
d
e
f
g
h
i
j
WiFi connection
1. Turn the camera on.
2. Press [
] shortly. “WiFi ON” will appear
on the camera display. Then the network
name “JOLT XXXXXX” and the network
password “1234567890” will be shown:
3. Activate WiFi on your device (smartphone/tablet) and connect to
JOLT_XXXXXX
.
4. Enter the password:
1234567890
. The password only needs to be entered on
the initial setup.
5. Run the JOLT 360 app on your device.
6. Press
to connect to the camera.
Note: You device (smartphone/tablet) must always be connected to the camera
by WiFi in order for the JOLT 360 app to work.
When the action camera is switched
on again after it has been switched off, steps 2 and 3 above need to be repeated in
order for your
device (smartphone/tablet) to be WiFi-connected to the camera.
Home screen
When you run the app and connect to the camera
the following home screen will
be displayed:
a) WiFi-status.
b) Select direction of rotation.
c) Select display mode, sphere, flat or
VR. We recommend display mode
flat for a clear full-screen image.
d) Picture/Video gallery.
e) Picture/Video resolution.
f) Battery charge status.
g) Gyro on/off. We recommend that
the gyro is activated so that you can
turn the telephone to choose which
camera angle you’d like to see.
Note:
This function requires that your
smartphone has a built-in gyroscope.
h) Camera settings.
i) Select function; video or photo.
j) Take a picture or start recording
video depending on what you chose
on the previous point.
