1
E
N
G
LI
S
H
. Basic setup
Get to basic setup by pressing [SETUP].
Use the arrow buttons
[
] and [
]
to change the mode.
1.
TV Type:
Open the settings for TV type, select the type you use: PAL, MULTI
or NTSC (the PAL system is used in Europe), press [ENTER/MENU] to confirm
the setting.
2.
Osd Lang:
Select language for the menus.
3.
Photo Show Time:
Select display time of photos, 1, 5, 10, 30 or 40 seconds.
4.
Repeat Mode:
Open Repeat Mode, choose between: Random, Single (repeat
all once), One (repeat current file), Folder (repeat the whole file) and None (no
repeat), press [ENTER/MENU] to confirm the setting.
5.
Auto Play:
Choose between: Auto Play, Photo, Music and Movie (Off/On)
press [ENTER/MENU] to confirm the setting.
6.
Set Logo Type
(Screen picture shown when no memory card is inserted).
Press [
] to open the settings for Set Logo Type, choose between: Default
and Captured (your own picture).
Add your own picture this way:
a) Show the selected picture on screen.
b) Go down to
Logo
, press [
] to go to Capture, press [ENTER/MENU] to
confirm that the picture is to be saved.
c) Wait! Capture Logo... is seen on the screen as the picture is being saved.
d) Go up to
Set Logo Type
, press [
] to go to
Captured
, press [ENTER/
MENU] to confirm.
Settings for slide show
Press [DISP] repeatedly to change the transition between pictures, there are 17
different modes.
The first mode is RANDOM (random effect during picture transitions) and then
you go from one mode to another all the way to NONE (no transition effect) before
starting over with RANDOM, and so on.
