4
English
15 16
17
18
20
19
21
25
26
27
28
22
23
24
Display
15. “MIN”, min. temp.
16. “MAX”, max temp.
17.
, battery charge level
18. “°C/°F”, unit for T1
19. Reading T1
20. “°C/°F”, unit for T2
21. Reading T2/T1–T2
22. “HOLD”, held reading
23. “AVG”, average reading
24. “Type K/J”, type of thermocouple
25.
, auto power off
26. “T2”, indicates that the reading
is from the T2 input
27. “T1-T2”, indicates that
the reading is the difference
between T1 and T2
28. “T1”, indicates that the reading
is from the T1 input
Operating instructions
Battery insertion
1. Undo the screw (14), remove the battery cover (13) and insert a battery,
1 × 6LR61, 9 V (sold separately).
2. Refit the battery cover and tighten the screw.
Thermocouples
Connect the two thermocouples to the input connections (1 and 11) on the top
of the thermometer.
Note:
Make sure that the connector is the right way round, it will only fit in one way.
The wide pin on the connector should fit into the widest hole.
Switching on/off
1. Press [
] (7) to switch the thermometer on.
2. Hold in [
] for 3 seconds to switch the thermometer off.
3. The thermometer will automatically shut off after 15 minutes if none of
the buttons is pressed.
