10
E
n
g
li
s
h
I. Repeat
Press [REPEAT] (52) on the remote control during playback to repeat one chapter/
folder or to repeat all (DVD). Repeat one track/all tracks (CD), or repeat a section
between two points (A–B).
J. Searching for a particular chapter
1. Press [SEARCH] (51) several times during playback to search for a specific chapter.
2. Enter the desired chapter or time using the numerical buttons (40).
3. Press [OK] (48) to confirm and start playback.
4. The player will automatically return to normal display after a few moments.
K. Displaying playback information
During playback: Press and hold in [DISPLAY] (46) to view information about what is
being played. The information will be shown in the upper part of the screen.
L. Changing audio track language (DVD)
Press [AUDIO] (50) once or repeatedly to change audio language. The current
language selection will be shown on the display. The current audio settings will
also be displayed.
N.B.
Works only with discs with more than one audio track.
M. Subtitles (DVD)
During playback, repeatedly press [SUBTITLE] (49) in order to select the subtitle
language. The current language selection will be shown on the display.
N.B.
Works only with certain DVD’s.
N. Programmed playback
Up to 20 programmes can be programmed for playback.
1. Press [PROGRAM] (41) to enter the programming mode.
2. Programme the titles and chapters using the numerical buttons (40). Select files
in the programming box using the direction buttons (39). N.B. If you wish to
programme chapter 2 for example, enter “02”.
3. To start playing the programmed section, go to “Start” in the programming menu
and press [OK] (48).
4. Change your programming as follows: Select the entry you wish to change using
the direction buttons (39). Enter the new title and chapter using the numerical
buttons (40).
N.B.
The programme can’t be changed once playback has begun.
5. To delete the programming list during playback, do as follows: Press [PROGRAM]
(41). “Stop” will now be highlighted in the programming menu. Press [OK] (48) to
delete all entries on the programme list. “Exit” will now be highlighted. Press [OK]
(48) to exit the programming menu.
