E
N
G
LI
S
H
1. Remove the mounting plate from the appliance by simultaneously pressing both of
the locking devices and lifting the mounting plate.
2. Fasten the mounting plate as displayed in the picture, with or without the spacer
rings. Use the longer screws together with the spacer rings.
3. Fasten the appliance onto the mounting plate by sliding it onto the hooks (1)
before folding the appliance upwards until the locking devices (2) have secured the
appliance.
4. Carry this out in the reverse order to unfasten the appliance.
Table placement
Fold out both of the supports if the appliance is to be placed on a flat surface.
Table use
Reserve battery
The clock radio has a reserve function using a battery. 1 9 V battery (not included) has
to be installed to ensure that your settings are not lost during a power failure.
Put the batteries in:
1. Remove the battery lid on the rear side of the appliance by pushing it straight back.
2. Lift the battery contact and put 1 6LR61-battery in.
3. Replace the battery lid and connect the power cable to the socket.
Please note!
Always remove the battery if the appliance is not going to be used for a
long time.
Use
Setting time
1. Press the button
Setting the time
(1) while repeatedly pressing the button
Setting the hour
(3) to set the hour.
2. Press the button
Setting the time
(2) while repeatedly pressing the button
Setting the minutes
(4) to set the minutes.
