4
English
Safety instructions
Warning:
Dangerous voltage.
• The fan heater should not be used if it is in any way damaged or malfunctioning.
Do not use the fan heater if the mains lead or plug is damaged in any way.
• The mains lead must be changed if damaged. This is to prevent the risk of electric
shock or fire and should only be carried out by the manufacturer, qualified service
facility or qualified technician.
• The fan heater should not be taken apart or modified. The casing houses non-
insulated components. Contact with these can lead to fire or electric shock.
• Never lower the fan heater into water or other liquids.
• Never touch the control panel or plug with wet hands.
• Never use the fan heater in the rain or in wet conditions.
Warning
• Never leave the fan heater unattended while in use.
• Do not touch any hot surfaces on the fan heater. Burn hazard. Never move the fan
heater while it is in use or before it has cooled down.
• Fire hazard. Flammable materials such as furniture, paper, clothing and curtains
must be at least 50 cm from the fan heater above, behind and to the sides and at
least 120 cm away from the front.
• Do not place towels or similar objects on the fan heater.
• Ensure that the fan heater is kept clean. Make sure that no foreign objects can
enter the ventilation openings as this can present a risk of electric shock or fire.
• The fan heater must never be used near flammable gases or liquids.
• The fan heater is only intended for normal domestic use and only in the manner
described in this instruction manual. Using the fan heater for other than its
intended use may lead to fire, electric shock, other types of personal injuries or
material damage.
• Children in the area where the fan heater is used must be kept under supervision.
• The fan heater is intended for indoor use only.
• Make sure to route the mains lead behind the fan heater so that it is not heated by
the hot air from the fan heater.
• The fan heater must only be plugged into to an earthed 230 V, 50 Hz power outlet.
Never connect the fan heater to the electricity mains using an extension lead.
Important
• Always unplug the fan heater from the wall socket when it is not in use.
• Disconnect the fan heater from the power supply by unplugging it from the wall
socket. Make sure that the wall socket and plug are easily accessible.
• The fan heater must not be connected to the mains during installation or service.
• The fan heater must only be used in the upright position.
