Handheld Sewing Machine
K029
Instructions for Use
Please read and retain these instructions for future reference
v001: 12/07/21
Power connection:
Remove batteries before you use the USB power point.
Insert the USB receiver into the energizing port of
the Handheld Sewing Machine and plug the other end into the power port.
This product is suitable for general USB interface line, which can be connected to mobile power supply,
computer, etc. The Handheld Sewing Machine needs to be kept plugged into USB port when being used at
all times.
3.Draw the thread from the spool through the thread
guide and pull the thread through the tension control. Do
not wrap the thread around the tension control. Note: To
loosen the tension control turn the dial clockwise.
4.Now pass the thread down and into the needle eye
from back to front, pull about 2-4 inches of thread to the
rear beyond the needle eye. Note: Must thread from back
to front.
To begin sewing
1.
Make sure your needle is properly threaded.
2.
Lift up the fastening plate and place in the desired fabric
underneath.
3.
Make sure you have at least 2-4 inches of thread through
the needle from back to front prior to sewing.
4. Hold the handle of the sewing machine and operate the
power switch with your thumb.
5. Choose the speed you want, 2 dots for fast or 1 dot for
slow by pressing the respective button.
