12 Stitches Sewing Machine
H741
Instructions for Use
Please read and retain these instructions for future reference
v001: 05/03/21
Replacing the bobbin
Turn the hand wheel anti-clockwise until the needle is in the highest position. Raise presser foot lifter
Slide the bobbin cover button to the right and remove the bobbin cover (Fig.3).
Put the new bobbin in the holder with thread going clockwise. Leave the needle hanging out (Fig.4).Hold the
end of the upper thread with one hand, and turn the hand wheel anti-clockwise with the other hand, the
needle thread will pick up the bobbin thread and pull it up through the hole under the needle (Fig.5).
Replace the bobbin cover and separate the two threads and pull them to the back of the machine under the
presser foot, leaving about 15 cm hanging there. Replace the bobbin cover (Fig.6).
CAUTION:
1.
Always switch off the appliance, disconnect from the power supply and remove foot pedal when
replacing bottom bobbin.
2.
Please use metal bobbins, otherwise the magnetic holder cannot tense the bobbin thread and work
rightly.