manualshive.com logo in svg

Clarke WOODWORKER CON1020, Operating & Maintenance Instructions, Page: 2 / 16

Share
Download
Clarke WOODWORKER CON1020 Operating & Maintenance Instructions Download Page 2

 2

SPECIFICATIONS

Model ...................................................................................... CON1020

Part No ...................................................................................... 6462026

Voltage .....................................................................................  230VAC

Power Input .............................................................................. 1020Watts

No Load Speed ....................................................................... 16,000RPM

Plug Fuse Rating ....................................................................... 13Amps

Input Current Max. .................................................................. 4.5Amps

Max Cutting Depth ................................................................. 3mm

Max. Rebating Depth ............................................................. 20mm

Sound Power Level .................................................................. 101dB L

WA

Vibration Emissions ................................................................... 3.847m/s**

Width of Cut ............................................................................. 82mm

Exhaust Port Dia. (Inner/Outer) .............................................. 35/40mm

Dimensions LxWxH .................................................................... 325x190x175mm

** See Notes on page 14 & 15

LIST OF PACKAGE CONTENTS

Please note that the details and specifications contained herein are correct at the time of going to

print. However CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data bracket

©  

Copyright CLARKE International. All rights reserved. April 2006

1.

Planer

2.

Dust bag

3.

Rebate Fence

4.

2 x Securing knobs (one fitted with screw and washer)

5.

Rebating Depth Gauge

6.

Side fence Bracket

7.

1 x Drive Belt

8.

Set of Carbon Brushes

9.

Hex. Wrench - 3mm

For Spare Parts and Service, please contact your nearest dealer,

or CLARKE International, on one of the following numbers.

PARTS & SERVICE TEL:  020 8988 7400

PARTS & SERVICE FAX:  020 8558 3622

or    e-mail as follows:

PARTS:   [email protected]

SERVICE:    [email protected]

PARTS & SERVICE CONTACTS

Summary of Contents for WOODWORKER CON1020

















Reviews:

No comments