O
12
WARRIOR 30
5
ELECTRICAL CONNECTIONS
WARRIOR 30, 110V Model
Connect the mains lead to a suitable 110V (50Hz) electrical supply through an
approved plug or a suitably fused isolator switch.
If using a portable 110V transformer, make sure it has a rated capacity sufficient
to take the load of the air compressor (see specifications on page 11).
ALL OTHER MODELS
Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through
an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.
WARNING! THIS APPLIANCE MUST BE EARTHED
IMPORTANT:
The wires in the mains lead are coloured in accordance with the
following code:
Green & Yellow
-
Earth
Blue
-
Neutral
Brown
-
Live
As the colours of the flexible lead of this appliance may not correspond with the
coloured markings identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW cord to terminal marked with a letter “E” or Earth
symbol “ ” or coloured GREEN or GREEN & YELLOW.
•
Connect BROWN cord to terminal marked with a letter “L” or coloured RED.
•
Connect BLUE cord to terminal marked with a letter “N” or coloured BLACK.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-
rewireable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
FUSE RATING
The fuse in the plug must be replaced with one of the same rating
(13 amps)
and this
replacement must be approved to BS1362.
We recommend that this machine is connected to the mains supply via a Residual
Current Device (RCD)
If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified
electrician, or your local Clarke outlet.
No. Description
Qty
Part No.
50 Reservoir
1
FN168H96000V
51 End Plug
2
FN011008000
52 Drain valve
1
FN022020000
53 Wheel
2
FN020130000
54 Push on Fasteners
2
FN015024000
55 Anti-vibration pads
4
FN199575000
56 Hand Grip
1
FN010121000
58 Rubber Foot
1
FN020118000
59 Valve Assembly
1
FN347043000
60 Valve
1
FN047113001
61 Spring
1
FN047113002
62 Washer
1
FN010041000
63 Tube
-
FN046001000
No. Description
Qty
Part No.
64 Valve
1
FN347022000
65 Adapter
1 FN199110140
66 Pressure Gauge-Res
1 FN330004000
67 Adapter
1 FN011017000
68 Pressure Gauge-Line 1 FN330006000
69 Output Reg. Assy
1 FN319013000
71 Tap Assy
1 FN322007000
72 Quick Release Conn. 1 FN116011065
76 Pressure Reg. Assy
1 FN321053000
77 Mains Lead w/plug
1 FN101GA0200
78 Screw
1 FN014013042
79 Steel Tube
4 FN117HN0001
80 Adapter
1 FN011248000
