Clarke Strong-Arm CLL500, Operating And Maintenance Instructions Manual

Page: 6 / 8

3
Thank you for purchasing this Clarke Load Leveller
Before attempting to assemble or operate the unit, please read this instruction
booklet thoroughly, and follow all directions carefully, paying particular attention
to the safety precautions. By doing so, you will ensure safe operation and enjoy
trouble free service from your Clarke Load Leveller.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Your receipt is required as proof of purchase.
This guarantee is invalid if the product is found to have been abused in any way,
or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission.
This guarantee does not effect your statutory rights.
SAFETY PRECAUTIONS
IMPORTANT
Before using your Load Leveller, it is in your own interest to read and comply with
the following safety rules.
•
NEVER exceed the safe working load capacity which is 500kg.
•
NEVER stand or work beneath a suspended load.
•
Do not allow the load to swing or drop suddenly whilst moving or lowering.
•
Use only slings or chains with a capacity equal to, or greater than that of the
load leveller.
•
If the load capacity decal becomes worn or illegible, contact Clarke
International Spares Division for a replacement.
•
Ensure the operator is skilled, and trained in both operation and safety
aspects.
•
Inspect the Load Leveller before use to ensure it is in good condition. Replace
any damaged or worn parts.
•
When replacing parts, only use those supplied by Clarke International as per
the parts lists on page 6.
WARNING
Failure to comply with these rules and precautions may result in loss of load,
damage to, or failure of, the equipment, or even personal injury.
Ensure that the Leveller is properly maintained and lubricated AT ALL TIMES , and
that no rust or other forms of corrosion is allowed to weaken any part.
6
No. Description Part No.
1 Main Body SN50001
2 Screw SN50002
3 Spacer SN50003
4 Crank Handle SN50004
5 Nut M12 SN50005
6 Handle SN50006
7 Bolt M12x115 SN50007
8 Nut M12 SN50008
9 Hook SN50009
10 Nut M10 SN50010
11 Washer SN50011
12 Chain SN50012
No. Description Part No.
PARTS LIST & DIAGRAM