4
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
3. Always fully lock the jib and legs into position before lifting.
4. Lower the load as much as possible before moving the crane. Do not use
the crane to transport loads over long distances.
5. Do not allow the load to swing or drop suddenly whilst moving or lowering.
6. Do not use this crane to lift people.
7. Do not work under any raised load.
8. Never climb on, or attempt to ride on the crane.
9. Take care not to trap your fingers in the adjustable parts of the crane.
10. Due to the weight of the loaded crane, the help of an assistant will be
beneficial when moving the crane around.
11. This is a heavy item (99kg). Take care when moving or folding away.
12. Never attempt to move a loaded crane across a floor having cracks,
pebbles, or other obstacles which might impede its movement.
13. To move a loaded crane, push it from the operators side. DO NOT move
the crane from the handle end and never pull the crane towards yourself.
CARE OF THE CRANE
1. Ensure that the crane is properly maintained at all times, and that no
corrosion is allowed to weaken any components.
2. When replacing parts, use only those supplied by Clarke International.
3. If the crane has been subjected to an abnormal load or shock, it should be
removed from service immediately and fully inspected by qualified
personnel.
4. Never tamper with the crane or modify it in any way, as this could prove to
be dangerous and will invalidate the guarantee. Only use the crane for the
purpose for which it is intended.
5. The components of this crane are designed to withstand the rated
capacity. Do not substitute any other components or exceed the rated
capacity of the crane.
6. If the load capacity decal becomes worn or illegible, contact Clarke Parts
and service department, on 0208 988 7400 for replacement.
Summary of Contents for Strong-Arm CFC1000LR
Page 16: ......
