3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
USING SAFETY OVERGLASSES
APPLICATION
These safety overglasses are designed for eye protection against moderate
impact hazards but are not unbreakable and do not provide unlimited eye
protection. They are designed to protect the user against eye injuries through
impact of flying particles or droplets. The safety overglasses are not intended
for welding use.
The safety overglasses have been designed for your personal safety and must
be worn for the whole duration of exposure to hazards. You should leave the
work area if dizziness or eye irritation occurs or if the goggles become
damaged.
The safety overglasses can be worn over normal spectacles although it may
be possible for these to transmit impacts.
SAFETY WARNINGS
1. Do not modify or alter the safety overglasses in any way.
2. Pitted or scratched lenses reduce vision, seriously reduce protection and
should be replaced immediately.
3. Materials that come into contact with the skin can cause allergic reactions
to certain susceptible individuals.
4. If in doubt, check with supervisory personnel to ensure you have the
correct level of protection relative to working conditions. If necessary
consult relevant European Standards.
5. The clear lenses of these safety overglasses offer no protection against
optical radiation given off during welding or cutting work.
CLEANING, MAINTENANCE AND STORAGE
1. Do not use abrasive materials for cleaning the safety overglasses. Always
clean either with optical cleaning solution, a cleaning solution very low in
alcohol or in warm soapy water. Rinse and dry with a soft cloth.
2. Parts that come into contact with the skin of different users should be
regularly disinfected.
3. It is recommended to store in a clean, dry polythene bag when not in use.
Store in a dry place sheltered from UV light, ideally in a protective case.
Ideally, this should be between 5
o
C and 40
o
C.
4. If the lenses become damaged the overglasses must be replaced.
