3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
The safety spectacles have been
designed for your personal safety
and must be worn for the whole
duration of exposure to hazards.
You should leave the work area if
dizziness or eye irritation occurs or if
the spectacles become damaged.
The safety spectacles can be quickly
adjusted for a secure, comfortable fit
by extending the telescopic side
arms.
SAFETY WARNINGS
1. Do not modify or alter the safety spectacles in any way.
2. Pitted or scratched lenses reduce vision, seriously reduce protection and
the safety spectacles should be replaced immediately.
3. Materials that come into contact with the skin can cause allergic reactions
to certain susceptible individuals.
4. If in doubt, check with supervisory personnel to ensure you have the
correct level of protection relative to working conditions. If necessary
consult relevant European Standards.
5. The clear lenses of these safety spectacles offer no protection against
optical radiation given off during welding or cutting work.
CLEANING, MAINTENANCE AND STORAGE
1. Do not use abrasive materials for cleaning the safety overglasses. Always
clean either with optical cleaning solution, a cleaning solution very low in
alcohol or in warm soapy water. Rinse and dry with a soft cloth.
2. Parts that come into contact with the skin of different users may be
regularly disinfected.
3. It is recommended to store the glasses in a clean, dry polythene bag when
not in use. Store in a dry place sheltered from UV light, ideally in a
protective case. Ideally, this should be between 5
o
C and 40
o
C.
4. If the lenses become damaged the overglasses must be replaced.
