Clarke RICHMOND, User Manual, Page: 4 / 12

4
UNPACKING & ASSEMBLY
TOOLS REQUIRED
Phillips screwdriver
13mm spanner
WARNING: Due to the weight of the stove it is recommended that at
least two people perform the un-packing and assembly.
Unpack the stove and remove packing materials.
Open the doors and remove the 4 legs, grate ashpan,
handle and flue outlet. The fixings kit can be found inside
the stove.
1. Place the stove on a soft surface such as the
polystyrene packing materials from the crate and tilt the
stove back.
2. Attach the two front legs using the bolts and large
washers supplied as shown in Fig 1.
3. Sit the stove upright and attach the flue adaptor as
shown in Fig 2 using the self tapping screws
supplied. Ensure the fireproof gasket is correctly
seated in the base of the flue adaptor.
These parts can be used for either top or rear mounting
of the flue, according to the chimney position in the
building. Refer to PLACEMENT AND INSTALLATION.
4. Set the grate and ashpan in position as in Fig 3. A
handle is supplied for when the stove is in use.
5. Place stove in desired location.
Note; All stoves should be installed in accordance with the
local building regulations.
Fig 3.