![Clarke PSD1A Operating & Maintenance Instructions Download Page 10](http://html1.mh-extra.com/html/clarke/psd1a/psd1a_operating-and-maintenance-instructions_2616170010.webp)
10
CLEANING & MAINTENANCE
WARNING: MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE
POWER SUPPLY BEFORE CLEANING, OR PERFORMING MAINTENANCE.
The pump should require no maintenance other than regular inspection and
cleaning.
1. Inspect the pump prior to use and do not use the pump if there is any
damage to the mains power cable or to the float switch or its connecting
cable.
2. Check pump regularly to ensure the inlet is clear of leaves or other debris.
It can be cleaned out either by back-flushing or by removing the base
plate (after undoing the three retaining screws) and cleaning out by
hand.
3. If the pump has been used for pumping swimming pool water or salty
water likely to leave chemical residues, it should be flushed through with
clean water before storage.
4. Store in a dry place after use.
If the pump shows signs of wear or damage, contact your CLARKE dealer for
advice. Do not attempt to repair the pump yourself, as you may damage the
waterproof seals and invalidate your guarantee. Repairs should be carried
out by your local CLARKE dealer, or contact the CLARKE Service Department
on 020 8988 7400.
ACCESSORIES
A wide range of accessories is available from your nearest CLARKE dealer,
including hoses and hose adaptors.
Summary of Contents for PSD1A
