Clarke PLS100FH Operating And Maintenance Instructions Manual Download Page 2

Thank you for selecting this CLARKE Power Washer for your cleaningrequirements.

This booklet contains important information about its operation and maintenance
and  should  be  read  in  conjunction  with  a  similar  guide  produced  by  the
manufacturers of the engine fitted to this particular unit.

Please read both of these carefully before using the machine.

GUARANTEE

This CLARKE product is guaranteed against faults in manufacture for twelve months
from the date of purchase.

In  case  it  is  necessary  to  make  a  claim  under  this  scheme,  please  retain  your
receipt or invoice to show when and where your purchase was made.

This guarantee will not be valid if the product is found to have been abused in
anyway, or used otherwise than for its intended purpose.

Under the Terms of this Warranty, any repair or replacement can only be carried
out by Clarke International Limited, or one of our authorised service agents.

Where possible any machine requiring attention should be returned to the dealer
from whom it was purchased. Where this is not appropriate, please contact Clarke
International, Service Department, Tel. 020 8556 4443.

Goods being returned to us should be consigned to:

This guarantee does not affect your statutory rights.

GENERAL SAFETY PRECAUTIONS

1.

Never direct the spray towards any person or animal.

2.

Never direct the spray towards live electrical wiring or equipment.

3.

Do not allow children to use this machine.

4.

Keep the machine itself well clear of water spray, so that it remains dry.

5.

Do not operate the machine with any of the covers removed.

6.

Ensure that only clear, clean water is supplied to this power washer.

7.

When using the detergent injection facility, use only chemical cleaning agents
that are a proved for use with power washers.

8

.When making a connection directly to the water mains supply you must ensure
that it incorporates a device suitable to prevent liquids syphoning back from
the power washer into the mains pipework.

9.

After the engine has been stopped and the water supply turnedoff, but before
disconnecting any hose or accessory, release any residual pressure in the
system by operating the trigger. When not in use we recommend that the
mains water supply is disconnected from the machine.

2

Reviews: