8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CARE & MAINTENANCE
Damaged components must be replaced immediately to avoid risk of eye
and face injuries. Periodically inspect the filter cartridge and lens covers.
Cracked, pitted or scratched lenses reduce vision and seriously reduce the
level of protection and should be replaced with genuine, certified spare parts.
Never use sharp tools to remove foreign material sticking to the outer lens
cover. This may cause damage which may cause incorrect function and
invalidate the warranty.
The outer lens cover can be removed for replacement if damaged as
described on page 4 and may need replacing regularly.
• Two replacement outer lens covers are supplied with the
headshield.
The inner lens cover may also require cleaning. Lift and slide the inside lens
cover (on the operators side of the filter cartridge) free from the filter cartridge
as shown on page 5.
• A single replacement is supplied with this headshield.
Clean the filter surface, sensors and solar cells regularly by wiping with a
household glass cleaner. Apply the cleaner with a clean cloth or paper towel.
DO NOT USE ALCOHOL TO CLEAN. DO NOT APPLY CLEANER DIRECTLY TO THE
CARTRIDGE.
Clean the headshield shell and sweat bands with detergent if necessary.
BATTERY REPLACEMENT
The batteries should last
approximately 5000 hours of normal
use. If the LOW BATTERY lamp comes
on, (Low Volume Alarm), the battery
should be replaced.
Summary of Contents for PG4
Page 12: ......
