Before Using the Grinder
Fit the Handle
:
Screw the handle
(4)
into the appropriate position in the grinder head
as required.
1
Safety ON/OFF Switch
2
Spindle Lock Button
3
Moveable Blade Guard
4
Handle
5
Abrasive Disk
6
Body
Figure (1) Overview
- 7 -
Adjust the Guard :
The guard
(3)
needs
to be adjusted to give maximum
protection from sparks and debris
produced when grinding. This must be
done before mounting the wheel/disk.
Slacken the four screws, arrowed in Fig
1a by half a turn only, sufficiently for the
guard to be rotated to its desired
position. When satisfied, tighten all four
screws securely.
Mount the Grinding Wheel / Cutting Disc
:
See page 8 for details
Connecting to the Power Supply :
Connect to the power supply using a Residual
Current Device. Do not use in wet or damp conditions.
WARNING ! Ensure that the power supply is disconnected before adjusting the guard
or mounting the handle.
Figure.1a Adjusting the Guard
1
3
4
5
2
6
