6
3. Sit the stove upright and attach
the flue adaptor as shown in Fig 2
using the hex screws supplied.
Ensure the fireproof gasket is
correctly seated in the base of
the flue adaptor.
4. Check that the blanking plate is
installed in the rear panel of the
stove when the normal flue exit is
required.
•
If the rear mounting flue
configuration is to be used, the
blanking plate will be fitted to
the top of the stove and the flue
connector to the rear panel.
5. Set the ashpan in position as
shown in Fig 3. A handle is
supplied for when the stove is in
use.
6. Place stove in the desired
location as shown in
POSITIONING AND INSTALLATION.
Take care not to damage the
floor surface.
Fig 3
Fig 2
