10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SPECIAL WARNINGS & INSTRUCTIONS
The splitting operation of the machine is designed to be activated by one
person. While there is the possibility that additional operators could be working
with the machine (e.g. for loading and unloading), only one operator should
perform splitting operations:
• Never attempt to remove a log which has got stuck on the wedge by
hand. Lower the wedge until the log is completely split.
• If a log becomes stuck on the wedge at the bottom position, press the
handle with one hand and turn off the machine with the other hand.
Slightly knock the log by hammer to free it.
SPECIFICATIONS
*This product is designed so that the motor may be run under load for an accumulated period of 4
minutes only and off load for an accumulated period of 6 minutes in any 10 minute period.
Motor
230V @ 50Hz / 1 Ph
Input Wattage
3000W
Duty Cycle
S6 40%*
Log Size Capacity
Diameter
8-30 cm
Length
10-55 cm
Maximum Force
6000 kg
Hydraulic Pressure
21.6 Mpa
Hydraulic Oil Capacity
3.5 L
Ram Travel
49.5 cm
Speed
Forward
3.6 cm/sec
Retract
16.5 cm/sec
Noise Pressure Level (LpA)
under no load;
78.8 dbA
under full load
89.8 dbA
Vibration
<2.5 m/s²
Dimensions
Length
84 cm
Width
91.5 cm
Height
149.5 cm
Weight
98.2 kg
Summary of Contents for LOGBUSTER V6
Page 24: ......
