Trouble Shooting
Problem
Probable Cause
Remedy
Log fails to split.
Incorrect positioning of the
log.
Reposition the log.
Log exceeds permitted
dimensions or wood is too
hard or knotty for the
capacity of the machine.
Use logs of the correct
specifications.
Wedge not cutting.
Check the splitting wedge
and sharpen if necessary.
Oil Leak
Locate the leak and rectify,
if necessary, contact your
nearest Clarke dealer.
Log pusher advances
jerkily and/or vibrates
badly.
Air in hydraulic system.
Check oil level. Top up if
necessary. If problem
persists, consult your
nearest Clarke dealer.
Oil leaks.
Leaking from the tank.
Check the bleed screw has
been unscrewed before
operating the machine.
Washer/seal on plug/
dipstick worn or damaged.
Fit replacement washer.
Worn or damaged oil seals.
Fit new oil seals, consult
your nearest Clarke dealer.
PARTS & SERVICE TEL: 020 8988 7400
or e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
IMPORTANT:
T
he use of parts other than CLARKE replacement parts may result in safety hazards,
decreased tool performance and may invalidate your warranty.
Log pusher advances
jerkily or with strong
vibrations.
-14-
Summary of Contents for Log Buster 3
Page 15: ...Parts Diagram 15...
Page 18: ...18...
