Clarke KING150 Operation & Maintenance Instructions Manual Download Page 2

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE hot washer.

The hot washer has been designed to use hot or cold water to clean any 
surfaces which can stand the force of the high pressure water jet and the 
action of the detergents used.

The hot washer must only be used for the purpose for which it was designed.

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase. 

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission. 

This guarantee does not effect your statutory rights.

LIST OF CONTENTS

The following items should be supplied in the carton. If any parts are missing or 
damaged, please see your Clarke dealer where you purchased the hot 
washer

1 x Hot Washer

1 x Cable / Hose Storage Bracket

1 x Gun Assembly

1 x Bottle for Detergent (Chemical)

1 x Lance Assembly

1 x Parts Pack

1 x High Pressure Hose Assembly

1 x Hose Adaptor

1 x Main Handle

1 x Nozzle Clearing pin

Summary of Contents for KING150





















Reviews: