background image

Clarke

®

  U.S. WARRANTY

This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workman-

ship under normal use and service for a period of one year from the date of purchase, when operated and
maintained in accordance with Clarke's Maintenance and Operations Instructions.  All handle components
are warranted for 5 years to be free from defects in materials or workmanship under normal use and service.

This warranty is extended only to the original purchaser for use of the product.  It does not cover normal

wear parts such as electrical cable, rubber parts, hoses and motor brushes.

If difficulty develops with the product, you should:

(a). Contact the nearest authorized Clarke repair location or contact the Clarke Service Operations Depart-
ment, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized Clarke repair location.  Only
these locations are authorized to make repairs to the product under this warranty.
(b). Return the product to the nearest Clarke repair location.  Transportation charges to and from the repair
location must be prepaid by the purchaser.
(c). Clarke will repair the product and or replace any defective parts without charge within a reasonable time
after receipt of the product.

Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts and is

given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN.  THERE ARE NO

WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF.  NO WARRANTIES,
INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY, SHALL BE IMPLIED.  A warranty
registration card is provided with your Clarke product.  Return the card to assist Clarke in providing the
performance you expect from your new floor machine.

Clarke

®

, 2100 Highway 265, Springdale,   Arkansas  72764.

Clarke

®

 

 

 reserves the right to make changes or improvements to its machine without notice.

Always use genuine 

Clarke

®

 

 Parts for repair.

               2100 Highway 265

Springdale, Arkansas, 72764

Division of

Summary of Contents for JETSTAR 1700






















Reviews: