Clarke ISP11A Operating And Maintenance Instructions Manual Download Page 2

Thank you for purchasing this Clarke Submersible Pump.

This highly efficient centrifugal pump is It is ideally suited for draining ponds, pools,
cellars, drains, building excavations ,  etc., and for pumping dirty water from septic
tanks where the solids in suspension are not greater than 50mm dia., and where
water temperature does not

 

exceed 50

°

C.  (please see Pump Features, page  5).

The pump is  NOT suitable for pumping salt water, aggressive or chemical
substances, or for permanent installation in fish ponds, as the acidity, found in fish
ponds, will damage the pump seals. It 

MUST NOT

 be used for pumping

hydrocarbons (petrol, diesel fuel, oils, solvents etc.).

Before using the pump, please read this instruction manual thoroughly and carefully
follow all directions given. This is for your own  safety and for that of others around
you, and  will also help you achieve long and trouble free service from your pump.

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months from
purchase date. Keep your receipt as proof of purchase. This guarantee is invalid
if the product has been abused or tampered with in any way, or not used for the
purpose for which it is intended. The reason for return must be clearly stated. This
guarantee does not affect your statutory rights.

Please note that  dismantling this pump will invalidate the guarantee

CONTENTS

Guarantee .................................................................... 2

Safety Precautions ....................................................... 3

Electrical Connections ................................................ 4

Pump Features ............................................................. 5

Installation ..................................................................... 6

Maintenance ............................................................... 7

Trouble Shooting .......................................................... 8

Pump Specifications .................................................... 9

Parts List and Diagram ................................................. 10

Parts and Servicing ...................................................... 11

Declaration of Conformity .......................................... 11

2

When disposing of this product, do not dispose of with general waste. It must be disposed of according to the laws
governing Waste Electrical and Electronic equipment, at a recognised disposal facility.

Summary of Contents for ISP11A













Reviews: