Clarke Image 26B, Operator'S Manual, Page: 16 / 40

MAINTENANCE
WARNING: Machine damage or injury could
occur if maintenance and repairs
are performed by unauthorized
personnel. Maintenance and
repairs must be done by
authorized personnel only. Use
only genuine Clarke parts.
NOTE: For maintenance of optional tools, read the
manual that is supplied with the tools.
Always empty the solution and recovery tanks
before performing any maintenance to the machine.
After Each Use of the Machine
1. To prevent damage to the valves and to the jets, flush
one gallon of clean water through the solution system.
2. If the auxiliary tools have been used, be sure to flush
them out with clean water.
3. Turn main power switch to off position.
4. Drain and rinse out the recovery tank.
5. Use a dry cloth to wipe the recovery tank, and the
tools both inside and out.
6. Inspect and clean the filter screen in the inlet hose
to the pump.
How to Prevent Freezing Temperature Damage
To prevent damage from freezing temperatures, follow
this procedure:
1. Remove any solution remaining in the solution tank.
2. Make sure that the machine and the pump are
completely dry.
3. Make sure the machine is at room temperature
before using it.
Electrical
NOTE: For electrical repairs, return this machine to a
Clarke authorized repair center.
Page -16- Clarke ® Operator's Manual IMAGE 26B