3
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SAFETY PRECAUTIONS
This headshield is not suitable for laser welding, laser cutting or overhead
welding applications or for oxy-acetylene.
•
The protective plate in this headshield is breakable and will not protect
against impact hazards.
•
This headshield is designed for use in grinding, arc welding or cutting
applications such as MIG/MAG, TIG, MMA, Plasma Arc, and Carbon Arc.
•
Use this headshield for face and eye protection against harmful rays,
sparks and spatter from welding and cutting.
•
Never place this product on a hot surface.
•
In the event of failure, the headshield remains protection against UV and IR
radiation.
•
Do not make any modifications to this product. Protection can be seriously
impaired if modifications are made.
•
When necessary, use identical replacement parts. This will ensure that the
safety of the product is maintained.
•
Do not use without the protective plate installed. Do not use if any part of
the headshield is cracked or broken.
•
Do not use this headshield for welding outside the range of DIN 9-13. Harm
to the eyes and impaired eyesight may result. Always select the correct
setting before use.
PREPARATION & USE
ADJUSTING THE HEADBAND TO FIT
1. The headband should be adjusted both in diameter and height to fit the
wearer’s head. To do this, press the adjustment knob on the back of the
headband and turn the nut either left or right to expand or contract the
headband.
2. The top headband can be adjusted by bending the strap and positioning
the peg in the appropriate hole.
3. When the headband adjusting nuts are tight, the angle of tilt can be
quickly and repeatably adjusted using the adjusting tab, by placing it on
the chosen peg on the headband.
Summary of Contents for GWH4
Page 8: ......
