![Clarke GRH35 Operation & Maintenance Instructions Manual Download Page 11](http://html1.mh-extra.com/html/clarke/grh35/grh35_operation-and-maintenance-instructions-manual_2614855011.webp)
11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
the burner ignites, keep button pressed for one (1) minute or until the
burner stays lit after releasing button.
WARNING: WHEN LIGHTING THE BURNER WITH A TAPER, LIGHT AT THE BOTTOM OF
THE SCREEN, NOT AT THE ORIFICE.
NOTE:
In cases where long runs of gas supply lines have been installed ahead
of the appliance, it may be necessary to bleed trapped air out of
supply lines before lighting pilot. New installations generally require
bleed of supply lines. Wait a minimum of five minutes after bleeding
supply lines before attempting to light heater.
SHUTTING OFF THE HEATER
1. Close propane gas supply cylinder valve.
2. Observe the burner until flame is extinguished.
3. Listen for closure of the safety valve.
4. DO NOT re-open the propane gas supply cylinder valve before the safety
valve closes.
CAUTION: THIS APPLIANCE IS HOT DURING NORMAL OPERATION. AVOID
PHYSICAL CONTACT. DO NOT PLACE CLOTHING OR OTHER
COMBUSTIBLE MATERIALS ON THIS APPLIANCE.
Summary of Contents for GRH35
Page 20: ......